Product Brochure
Request A Quote

When scanner access is limited, the CIRC-IT makes single probe scanning possible.

Small diameter, low profile scanning, made possible with the CIRC-IT – Single Probe Weld Scanner. Designed to provide encoded probe positioning circumferentially around piping and tubing ranging in size from 21.4 – 114.3 mm (0.84 – 4.5 in), this manually operated scanner can operate in an 11 mm (0.433 in) radial clearance envelope due to the ultra low profile design.

Features

Component Identification

Durable urethane wheels provide smooth rolling and adequate traction in vertical scanning applications.

The CIRC-IT scanner features a cable management system for irrigation lines and probe cables.

Links provide infinite adjustment for pipes or tubes to be scanned between 21.4 – 114.3 mm (0.84 – 4.5 in).

Carries Olympus A15 small-footprint probes and wedges.

The included irrigation kit contains the necessary hoses, fittings, tubing, etc, required to connect a couplant pump to the probe(s) being carried by the scanner

A spring-loaded encoder maintains constant contact with the scan surface for precise encoder measurements.

Kit Contents

Single-sided CIRC-IT scanner

Long latch x1
Short latch x1
Wheel link x6
Short link x1
Medium link x4
Long link x5
Protective sleeving, 1.5 m (4.9 ft)
CIRC-IT spare fasteners kit
Irrigation fittings and tube, 2.5 m (8.2 ft)
User manual
Setup chart
Rugged carrying case

Chain retrieval tool
Loom installation tool
Torx® driver
Phillips driver
2 mm hex driver

Specifications

Pipe Diameter Range: 21.4 mm – 114.3 mm (0.84 in – 4.5 in)
Minimum Radial Clearance: 11 mm (0.433 in)
Encoder: RS422 line driver, compatible with all standard encoder inputs
Encoder Resolution: 31.30 counts/mm (795.0 counts/inch)
Probe Holding Capacity: 1 phased array wedges
Encoder Cable Length: 3 m (9.8 ft)
Inspection Surface: Ferrous and non-ferrous

Radial Scanner Clearance: 11 mm (0.43 in)

Scanner Height: 11 mm (0.43 in)
Scanner Width (Minimum): 53.5 mm (2.11 in)
Scanner Length: 108 mm (4.2 in)
Scanner Width (Maximum): 185 mm (4.5 in)
Scanner Weight: 0.09 kg (0.2 lb)
Shipping weight: 3.1 kg (6.8 lb)

Operating Environment: -20°C (-4°F) to 50°C (122°F)
Environmental Sealing: Dust-tight, watertight (not submersible)

*Removal of the encoder cable guard is required for scan diameters smaller than 31.75 mm (1.25 in).
**Scanner only, Transducers and wedges not included
***Custom umbilical lengths are available.
****Does not include cable management (sleeving).
*****Maximum probe spacing is achieved using the included 94 mm (3.7 in) crossbars.
******Approximate shipping weight of standard kit contents.