loader image
We Understand...
To Undertake...
Tube Inspection

IRIS 9000+ Accessories

The following components below are necessary to complete an IRIS Inspection:

Part NumberDescription
400000Stainless Steel & Brass self-contained water filtering system, filter and pressure regulator for water supply to probe assemblies
Part NumberDescription
50310015.87mm (.625″) OD test/calibration tube; 90/10 Copper/Nickel tube with known machined defects to verify instrument can meet designed sensitivity
50110019.05mm (.75″) OD test/calibration tube; 90/10 Copper/Nickel tube with known machined defects to verify instrument can meet designed sensitivity
50210025.4mm (1″) OD test/calibration tube; 90/10 Copper/Nickel tube with known machined defects to verify instrument can meet designed sensitivity
50410060.3mm (2.375″) OD test/calibration tube: 90/10 Copper/Nickel tube with known machined defects to verify instrument can meet designed sensitivity
Part NumberDescription
300000Remote probe motor drive; geared stepping motor and encoder to push/pull probe through tube and record probe’s position, with speeds up to 15.24m (600”) per minute
Part Number Description
300000 Remote probe motor drive; geared stepping motor and encoder to push/pull probe through tube and record probe’s position, with speeds up to 15.24m (600”) per minute
Part NumberDescription
907000Water pump unit; 90VAC – 120VAC or 200VAC – 240VAC 50/60 Hz with 1 suction hose
Part Number Description
807025 110VAC ground Fault Interrupter
807026 240VAC ground Fault Interrupter
808100 Hand tools & small spares kit; assortment of tools to maintain IRIS system and its components (Includes selection of small spares and consumable parts)
807042 LPS-2 Lubricant (Gallon) & Two Spray Bottles
602000 12VDC – 110VAC DC/AC Inverter; allows use of vehicle battery to operate IRIS system