for advanced inspections
Industry-leading technology for more efficiency
MIZ-28 delivers more technology and exceptional performance for high-speed and high-efficiency inspection of heat exchanger tubing. It comes equipped with industry leading data management features with more on-board data storage and easy file transfer. It also features two injection technologies in one box. Multiplexed and simultaneous injections are combined into one box that can test most tube materials, including magnetic alloys like carbon steel.
Testing with multiplexed frequencies lets you discover issues from surface cracks to deep flaws with speed and reliability.
Simultaneous injection gets you the highest testing speeds, and supports remote field testing.
Large Internal Drive
A 256 GB internal hard drive provides a massive amount of storage of recorded inspection data.
Its structural design makes it an ideal unit to take on heavy-duty conditions.
2 Technologies in 1
Both multiplexed and simultaneous injections are supported, promoting speed, efficiency and RFT capabilities.
Zetec Software Ready
Data files are compatible with our Velocity/AN Software, EddynetSuite Analysis, and ET Analysis for Windows.
Probe Pusher Support
Provides support for our 3D Probe Pusher with optional conduit gun using a Model III Probe Pusher Control system.
256 GB internal hard drive
|Weight||16.0 lb (7.3 kg)|
|Dimensions||8.0H x 11.5L x 13.5D in. (20.3 x 29.2 x 34.3 cm)|
|Power||85 – 264 VAC 47 – 63 HZ 140 watts maximum, with all options|
|Operating Temperature Range||32°F to 113°F (0°C to 45°C)|
|Storage Temperature Range||-40°F to 185°F (-40°C to 85°C)|
|Frequency Range||5 Hz to 10 MHz|
|Display||Color 640 x 480 pixel (8.4-in.) active matrix display offers same resolution as computer monitor|
|Drive||0 – 20 Vpp|
|Sample Rate – samples/second||Multiplexed mode—Operator adjustable up to 15,600 s/s for 1 frequency; 3,900 s/s for 4 frequencies|
|Sample Rate – samples/second||SI mode—Operator adjustable up to 15,600 s/s at 4 frequencies|
|Memory||256 GB internal hard drive|
|Memory||Flash memory for configurations and firmware updates via USB key|
|Memory||Non-volatile SRAM memory for storage of instrument settings|
|Data Recording||USB Flash Drive, Magneto Optical Disk, Jaz Drive, Zip Drive|
|Data Recording||256 GB internal hard drive|
|Input/Outputs||Ethernet 10/100BaseT for network interface|
|Input/Outputs||VGA—output display to VGA monitor or video output with external converter box|
|Input/Outputs||RS-232—communication to Model III Probe Pusher Control|
|Input/Outputs||USB for printer, keyboard, mass storage device|
We’ve taken our popular Eddynet PC software and customized it for the balance-of-plant (BOP)/heat exchanger (HX) market. Our easy-to-use Velocity Software is the most effective solution for data analysis and management. It offers significant enhancements over our older ET Analysis and EIM BOP software.
Velocity AN for Analysis
- Bobbin, MRPC and Array Analysis
- Enhanced C-Scan
- Multi-datafile Comparison
Velocity DM for Data Management
- Inspection Planning and Management
- Historical Data Management
- Test Plans
- PID Test