Product Brochure
Request A Quote

Translate two TOFD probes around ferrous piping and vessels

An easy to use manual magnetic scanner which includes a precision spring-loaded encoder. Essentially a plug and play device, the STIX – 2 Probe TOFD Scanner routes cables and hoses through the handle/cable management and then plug the encoder into any standard instrument and get to work quickly and efficiently with the specialized spring-loaded probe holders.

Features

Component Identification

The handle acts as a means for scanner control.

Dual brakes lock the magnetic wheels to prevent unwanted scanner motion.

Simplified probe holder carries TOFD wedges with ease.

Magnetic wheels adhere the scanner to the ferrous scan surface. Additional magnetic wheels may be added to the scanner to increase the attraction to the inspection surface.

Route cables and hoses through the handle and provided sleeving.

Kit Contents

The handle acts as a means for scanner control.

Dual brakes lock the magnetic wheels to prevent unwanted scanner motion.

Simplified probe holder carries TOFD wedges with ease.

Magnetic wheels adhere the scanner to the ferrous scan surface. Additional magnetic wheels may be added to the scanner to increase the attraction to the inspection surface.

Route cables and hoses through the handle and provided sleeving.

Specifications

Circumferential Pipe Range: 10.2 cm (4 in) to flat
Internal Pipe Range: Flat to 152.4 cm (60 in)
Encoder Resolution: 9.05 counts/mm (230.0 counts/inch)
Probe Holding Capacity: 2 TOFD wedges
Encoder Cable Length: 5 m (16.4 ft)1
Inspection Surface: Ferrous materials

Radial Scanner Clearance: 13.1 cm (5.1 in)

Frame Height: 10.5 cm (4.1 in)
Frame Width: 17.5 cm (6.9 in)
Frame Length: 45.4 cm (17.9 in)
Frame Weight: 1.19 kg (2.6 lb)
Shipping Weight: 4.1 kg (9 lb)2

Operating Environment: -20°C (-4°F) to 50°C (122°F)
Environmental Sealing: Dust-tight, watertight (not submersible)

Wedge Width: 31 – 41 mm (1.2 – 1.6 in)

Probe Holder Pivot Buttons

Pivot Hole Size: 8.0 mm (0.315 in)
Wedge Type: Olympus PA
Hex Size: 9.53 mm (3/8 in)

Pivot Hole Size: 5.0 mm (0.197 in)
Wedge Type: Olympus TOFD, Olympus A27 DMA
Hex Size: 9.53 mm (3/8 in)

Pivot Hole Size: 2.7 mm (0.106 in)
Wedge Type: Sonatest DAAH PH
Hex Size: 9.53 mm (3/8 in)

Pivot Hole Size: 9.5 mm (0.375 in)
Hex Size: 11.1 mm (7/16 in)

Pivot Hole Size: 3.0 mm (0.118 in)
Hex Size: 9.53 mm (3/8 in)

Pivot Hole Size: 2.3 mm (0.009 in)
Hex Size: 9.53 mm (3/8 in)

Pivot Hole Size: Conical Head
Hex Size: 9.53 mm (3/8 in)

Pivot Hole Size: 5 mm (0.197 in)
Wedge Type: Internal Zetec PA/TOFD, Phoenix TOFD
Hex Size: 9.53 mm (3/8 in)

Pivot Hole Size: 5.6 mm (0.221 in)
Hex Size: 9.53 mm (3/8 in)

  • Custom umbilical lengths are available.
  • Approximate shipping weight of standard kit contents.
    Technical specifications subject to change.